Recently, there has been a tendency to increase weed infestation of fields due to a decrease in chemical protection activities caused by the desire to reduce the cost of expensive drugs. Using the LIRA harrow, you can not only destroy weeds without the use of chemicals, but also seal in moisture and provide air access to the seeds.

Uniform distribution of crop residues

Combine straw choppers, especially those with wide headers, do not always distribute the straw optimally over the soil surface, which results in uneven germination, uneven maturation, and, as a result, a significant deterioration in the quality of the harvest. This can be remedied with the LIRA harrow, which distributes crop residues evenly.

Improving the quality of soil cultivation

The working section consists of five rows of spring teeth, which are arranged in a 38 mm spacing to ensure a high-quality finish without gaps.

Gentle processing is ensured by the possibility of changing the angle of the teeth. The tooth angle can be adjusted simultaneously on the entire section in the range of
15º to 90º in 15º intervals.

The vibrating action of the elastic tines prevents the harrow from clogging and ensures high quality soil loosening.

High-quality terrain copying for perfect work

The LIRA spring harrow can be suspended from chains to successfully traverse even the most difficult terrain despite its large working width.

Premium spring tooth

The spring tooth is made of high quality special steel with a special double heat treatment.

The diameter of the tooth is 10 mm, but due to the use of special steel with the application of special double hardening, which is an innovative technology of the company, the wear resistance of the tooth in the working area is significantly (2-3 times) increased, while maintaining high strength of the tooth in the area exposed to rotational loads

LIRA tooth life is 3 times higher than that of other manufacturers.

Forged shaft

Unlike their welded counterparts, forged crosspieces provide consistently high strength and reliability regardless of the "human factor".

Advantages of the LIRA M series

• Telescopic rigid linkage to prevent the half-frames from coming off quickly during sharp turns in the vehicle.
• Hydraulic control of the transport wheels for easy folding/unfolding.
• Two-part boom with the possibility of installing a fertilizer tank directly on the sowing arm.

The LIRA M Series tooth harrows have a reduced transport width of 3 meters (in accordance with EU road traffic regulations).

Wide processing range

The ability to set the tooth working positions at different angles allows you to work the soil in different working conditions with a working depth of 3 to 9 cm.

Save time and fuel

With the LIRA harrow, you can significantly reduce your fuel costs, as the fuel consumption is around 1 liter per hectare!

This makes tillage not only efficient but also cost-effective, reducing the overall cost of farming.

Easy folding and unfolding - easy conversion to transport position

The design of the frame and trailer unit allows one tractor driver to move the harrow from transport to working position and vice versa.

The LIRA wide-spread spring harrow is equipped with variable pitch wheels for quick folding and unfolding.

Gentle tires

Special low-pressure agricultural tires make it possible to virtually eliminate the risk of damage to crops from tire run-overs. In addition, these special agricultural tires, unlike conventional car tires, prevent excessive soil compaction and leave virtually no ruts.

The special tread pattern of the tires allows for effective dirt removal and ensures that the implement does not stick to the wheels even in high humidity conditions.